Yes! We can take your current front door and add glass into the door. This creates instant curb appeal, saves you money on redoing your entire door unit and only takes about 30 minutes to install the glass.

All of our products have warranties attached to them ranging from a couple years to a lifetime warranty. Any install issues that may come up are warranted under Romac for the first year after install.

Most of our units do not come pre-finshed meaning it is up to the homeowner to paint or stain their door after installation. This avoids any scratches or damages to the doors finish during the install process.

New locks do not come with the unit. However, we have a lock display from kwikset that you can pick not only the style but also the color of any new locks you would want. This gets added onto your order and we will install them onto your new unit.

The doors that those stores carry are full height & width doors. Meaning, if you have a custom opening that may be smaller than your standard opening, their doors will not fit. At Romac, we customize heights and widths of our units to fit into any size opening.

Signs that may indicate you need to replace your residential door include damage such as cracks, warping, rotting, or dents, drafts or air leaks, difficulty opening or closing the door, or an outdated appearance.

It is possible to replace your residential door yourself if you have the necessary tools and experience, but it is often recommended to hire a professional for the best results and to ensure proper installation and safety.

The time it takes to replace a residential door can vary depending on the complexity of the project and whether any additional work is needed, such as repairing the door frame or adjusting the opening size. However, most residential door replacements can be completed in a few hours to a day.

During the residential door replacement process, a professional will typically remove the old door and frame, prepare the opening for the new door, and then install the new door and hardware. They may also make any necessary adjustments or repairs to ensure a proper fit and seal.

Drywall, also known as gypsum board or wallboard, is a building material used for interior walls and ceilings. It is made from gypsum plaster and is sandwiched between two sheets of heavy paper or fiberglass mats.

Drywall is typically installed by cutting it to size and screwing it onto wood or metal studs using drywall screws. The seams between the sheets of drywall are then covered with joint compound and tape, sanded down, and painted or textured to match the surrounding surfaces.

Drywall is a popular building material because it is relatively inexpensive, easy to install, and provides a smooth, flat surface for painting or wallpapering. It also has good fire resistance and can help reduce sound transmission between rooms.

Common problems with drywall include cracking, sagging, and moisture damage. These issues can be caused by a variety of factors, such as improper installation, inadequate support, or water leaks. Proper installation and maintenance can help prevent these problems from occurring.

Minor damage to drywall can be repaired using joint compound and tape, while larger holes or cracks may require replacement of the affected area. Repairs should be sanded and painted to match the surrounding surfaces for a seamless finish.

We offer a wide range of installed garage doors including steel, aluminum and composite garage doors. We also offer different styles including sectional, roll-up, golf-cart and carriage-style garage doors.

Yes, we have a team of experienced professionals who can help you choose the right garage door product for your home based on your needs, budget, and preferences.

Yes, we offer professional garage door installation services. Our team of experts can help you with the entire installation process, from measuring to the final touches.

The installation time will depend on the type of garage door and the complexity of the installation. However, our team will work to ensure the installation process is completed as quickly as possible without sacrificing quality.

Yes, we offer garage door repair services. Our team can help fix any issues with your garage door, including broken springs, damaged panels, and faulty openers.

You should consider replacing your garage door if it is damaged, outdated, or no longer functional. Our team can help you determine if it's time to replace your garage door.

The time it takes to replace a garage door will depend on the type of door and the complexity of the installation. Our team will work to ensure the replacement process is completed as quickly as possible without sacrificing quality.

Yes, we offer warranties on our garage door products and services. Our team can provide you with more information on the specific warranties that apply to your purchase.

The most common types of lumber used in construction include softwood (such as pine, spruce, and fir) and hardwood (such as oak, maple, and cherry).

Lumber is graded based on its quality and intended use. The highest grade is typically used for finished carpentry, while lower grades may be used for framing or other purposes.

When selecting lumber, consider the intended use, the appearance you want to achieve, and the budget. Look for straight, clear pieces with minimal knots, and avoid boards with cracks, splits, or warping.

Faced insulation has a vapor barrier attached to it, which helps to prevent moisture from penetrating the insulation material. Unfaced insulation, on the other hand, does not have a vapor barrier and is typically used in areas where moisture is not a concern.

Yes, installing high-quality insulation can help reduce energy costs by improving the energy efficiency of your property. Insulation helps keep your property cool in the summer and warm in the winter, which can significantly reduce heating and cooling costs.

R-value is a measure of an insulation material's resistance to heat flow. The higher the R-value, the greater the insulating power of the material.

The ideal R-value for your home will depend on a variety of factors, including your location, climate, and type of heating and cooling system. Our team of experts can help you determine the appropriate R-value for your home based on these factors.

Blown insulation is a loose-fill insulation material that is blown into attics, walls, and other hard-to-reach areas using special equipment. This type of insulation is ideal for retrofitting older homes or for adding insulation to areas that are difficult to access with traditional batt insulation.

Insulation can help to reduce the amount of dust, pollen, and other allergens that enter your home through cracks and gaps in the building envelope. Additionally, some insulation materials, such as fiberglass and mineral wool, are naturally resistant to mold and mildew growth, which can help to improve indoor air quality.

There are many types of moulding available, including baseboards, crown moulding, chair rails, picture rails, and wainscoting, among others.

When choosing moulding, consider the style of your home and the overall aesthetic you want to achieve. You may also want to consider the height of your ceilings, as taller ceilings may require larger or more ornate moulding to balance the space.

The lifespan of a roof depends on several factors, including the type of roofing material, quality of installation, and climate. Asphalt shingle roofs typically last around 20-25 years, while metal roofs can last up to 50 years or more with proper maintenance.

Signs that your roof may need repair or replacement include leaks, missing or damaged shingles or tiles, excessive granule loss, and sagging or uneven rooflines. It's important to have a professional roofer inspect your roof regularly to identify potential issues before they become major problems.

When hiring a roofing professional, look for someone with experience and a good reputation in the industry. Check for licensing and insurance, ask for references, and get a written estimate outlining the scope of work and associated costs.

We have two conveniently located Showrooms. One at 1432 SW 15th Ave in Ocala, FL and the other at 700 E. Main St. in Leesburg, FL.

Our showrooms showcase doors, windows, siding, millwork, and hardware

We offer a variety of storefront window options, including energy-efficient windows, hurricane impact windows, and custom designs to meet your specific needs. Our team of experts can help you determine which storefront window option is best suited for your property.

The duration of the installation process depends on the size of the property and the type of storefront window being installed. We strive to complete every project in a timely and efficient manner while ensuring that the storefront windows are installed properly.

Yes, we provide storefront window replacement services. If you have old or damaged storefront windows in your property, our team can remove them and replace them with new, high-quality windows.

The cost of storefront window installation varies depending on the size of the property, the type of storefront window being installed, and other factors. We provide free estimates and consultations to help you determine the cost of your storefront window installation project.

At RoMac Building Supply, we are committed to providing high-quality storefront window installation and replacement services. Our team of experts is highly skilled and experienced, and we use the latest techniques and equipment to ensure that your storefront windows are installed properly and efficiently. We also offer a variety of storefront window options to meet your specific needs, and we provide free estimates and consultations to help you make informed decisions about your storefront window needs.

We offer a wide range of tools and hardware including power tools, hand tools, fasteners, plumbing supplies, electrical supplies, and more. Products vary by location.

No, we do not offer tool rentals.

Yes, our team of experts can help you find the specific tool or hardware item you are looking for. Contact your local RoMac Building Supplies location for assistance.

Yes, we offer various discounts and promotions on our tools and hardware products throughout the year. Contact your local RoMac Building Supplies location, signup for our weekly newsletter that has has current Deals of the Week.

Truss manufacturing is the process of constructing pre-fabricated structures made of wood or metal that are used to support roofs, floors, and walls in buildings.

Pre-fabricated trusses are a cost-effective and efficient solution for building structures. They are designed to be strong, durable, and reliable, and can be quickly and easily installed on site.

We manufacture Roof trusses and Floor trusses. Our trusses can be customized to fit your specific project needs.

Our trusses are manufactured using state-of-the-art equipment and technology. We begin by designing and engineering the trusses using computer-aided design (CAD) software. The trusses are then constructed using high-quality materials and fasteners, and are assembled in a controlled environment to ensure accuracy and consistency.

No. We Design, Manufacture and Deliver Trusses

We offer a wide range of window products including vinyl, aluminum, clad, and composite windows. We also offer different styles including single hung, double hung, casement, awning, horizontal rollers, and fixed.

Yes, we have a team of experienced professionals who can help you choose the right window product for your home based on your needs, budget, and preferences.

Yes, we offer professional window installation services. Our team of experts can help you with the entire installation process, from start to finish.

The installation time will depend on the type of window and the complexity of the installation. However, our team will work to ensure the installation process is completed as quickly as possible without sacrificing quality.

Yes, we offer window repair services. Our team can help fix almost any issues with your windows, including broken glass, damaged frames, and faulty hardware.

You should consider replacing your windows if they are damaged, outdated, have bad seals (causing air to enter or escape), or have glass that is not energy efficient (like single pane glass). Our team can help you determine if it's time to replace your windows.

The time it takes to replace a window will depend on the type of window and the complexity of the installation. Our team will work to ensure the replacement process is completed as quickly as possible without sacrificing quality.

Yes, we offer warranties on our window products and services. Our team can provide you with more information on the specific warranties that apply to your purchase.