Plan Description
Meet The Magnolia, this single-story, modern farmhouse has a split floor plan design that is perfect for entertaining.
Floor Plan
The Magnolia
Starting at
$2,195
*This price includes Florida-engineered, permit-ready plans.
This Plan can be Customized!
Tell us about the improvements you would like to see so we can put together an estimate for the changes you would like to make.
Full Specs & Features
Basic Features
Bedrooms – 3
Baths – 2 1/2
Office – 1
Garage – 2 Car
Front Porch – 1
Rear Porch – 1
Dimension
Depth: 72′-8″ FT
Width: 76′-8″ FT
Height: 10′ FT
Area
Living: 2195 Sq/Ft
Front Porch: 304 Sq/Ft
Rear Porch: 452 Sq/FT
Attic Storage: 404 Sq/FT
Garage: 714 Sq/Ft
Total: 4070 Sq/Ft
Roof
Pitch: 7″/12″, 3″/12″
Roof Type: Architectural grade shingle
Roof Structure: Truss Layout
Exterior Wall
Wall Finish: Board and batten
Exterior Wall Material: CMU Wall
Insulation: 3/4 R-Matte
Outdoor Spaces
Front Porch
Rear Porch
Kitchen Features
Kitchen Island
Ceiling
Living, Bedrooms, Office: 10′-0″
Garage, Front Porch, Rear Porch: 10′-4″
What’s Included in this Plan Set
Floor plan, Elevations, Foundation Plan, Roof Layout with Details, Electrical Plans, Detail Sheets Applicable to Plans, Florida Approved Code Standard Note Sheet.
– Floor Plans: ¼” = 1-0″ scale floor plan indicating the location of the frame and masonry walls, support members, doors, windows, plumbing fixtures, cabinets, shelving, ceiling conditions, and notes deemed relevant to this plan.
– Elevations: All elevations at ¼” = 1’-0” scale. The drawing will indicate at each side view of the house, roof overhangs, header heights, roof pitches, materials used, and any details we feel necessary to explain the construction.
– Foundation Plans: ¼” = 1’-0” scale. Foundation plans indicating the location of structural walls, water drains, roof footer, floor slope, floor level, reinforcing steel, structural columns, and structural post and any details we feel necessary to explain the construction.
– Electrical Plans: ¼” = 1’-0” scale. Plans indicating location and types of electrical fixtures, switches, outlets, and how they are to be switched.
– Roof Plans: ¼” = 1’-0” scale. Roof plans show roof location, truss layout, anchor connectors, and structural detail.
– Structural detail: Scale and not to scale details showing construction specifications.
– Standard Notes: Information about codes and help instructions for the construction of the project.
– Engineered by a Qualified Florida Engineer.
– Truss Layout Engineered with each Truss Reactions and Strapping Details.
– Complete Material Take-off with Pricing.
– Florida Approved Energy Calculations with Duck Work. (optional)
– Revisions available for a fee.