top of page
Drywall Delivery

Subscribe for RoMac updates, promotions, and industry news.

November 2026 Commodity Report: Lower Lumber Prices, Higher Costs Ahead

3 days ago
6 min read
Line graph showing the RoMac Building Supply Whole House Commodity Index for November over the past 10 years, comparing annual index values to illustrate long-term trends in building material costs.
RoMac Whole House Commodity Index, November 2026: $53,443. The Index tracks wholesale costs for a 2,200-square-foot wood-frame home with a concrete stem wall in Central Florida.

The RoMac Whole House Commodity Index fell 1.1 percent in November to $53,443, a drop of $594 from October with lumber driving the drop. Spruce 2x6 was down 16.1 percent, spruce studs were down 15.7 percent, and Southern Pine 2x4 lost 7.0 percent. Plywood and steel products went the other way.


The drop is good news for builders, but it comes with a catch. Manufacturers have already announced January price increases, diesel is more than 50 percent above last year, and markets expect the Fed to raise rates in December.


New-Home Market

Builders are continuing to pull back. October single-family starts rose 4.0 percent to 864,000, but September was revised down to 831,000 from the 859,000 first reported, and starts are 3.2 percent below last year. Single-family permits fell 8.7 percent to 772,000, 12.9 percent below last year. Permits come before starts, so the next few months will be soft too.


Sales held up better. September new-home sales were essentially flat at 676,000, though that's 5.3 percent below last year, with 8.4 months of supply on the market. The median price of $400,400 is down 3.9 percent from a year ago and has been below the median existing-home price for seven months running. Builders are getting those sales with price cuts and incentives. That's a problem for us. A finished home that sells doesn't need lumber and trusses, but a new start does, which is why framing lumber keeps sliding.


Builder sentiment is at a 14-year low. The NAHB/Wells Fargo index fell to 25 in November, the lowest since April 2012, and 46 percent of builders cut prices, the highest share since the pandemic.


Florida

Florida is slowing down. October single-family closings fell 10.1 percent from last year to 19,049, the third month running they've dropped, and condo and townhouse closings fell 5 percent. Through July, single-family closings were ahead of last year, but higher rates ended that.


Pending sales are the bigger concern, down 15.7 percent for single-family and almost 12 percent for condos. Contracts turn into closings one to three months later, so Florida Realtors' chief economist expects closings to keep falling year over year for another month or two.


Prices are holding, though. The single-family median rose 2.2 percent to $420,000, the eighth straight month of year-over-year gains. Condos went the other way, down 3.3 percent to $290,000, and listings for both are below last year.


Hurricane Isaias hit the Panhandle on October 9 and has produced about $735 million in insured losses so far, with more claims coming in. Insurers can handle it. About a month out, it's close to where Hurricane Sally stood in 2020 once you adjust for inflation, and far below Michael, which topped $7 billion in Florida. Repairs will add some demand for roofing and sheathing in the Panhandle, though the overall volume is relatively small.


Voters passed Amendment 3 on November 3, and it changes the cost of owning a home here. It raises the non-school homestead exemption from about $50,000 to $150,000 next year and $250,000 in 2028. People who weren't Florida residents by the end of 2026 start with a $50,000 exemption and get the larger one in their fifth year of homestead exemption. For a homeowner who qualifies, the math on a $400,000 home is the extra exemption times the local non-school tax rate. That's about $100,000 more exempt in 2027 and $200,000 more in 2028, so at a typical rate of 10 to 12 mills ($10 to $12 of tax per $1,000 of value), the savings run roughly $1,000 to $1,200 a year in 2027 and $2,000 to $2,400 a year in 2028, depending on the county.


Mortgage Rates: 7.11 Percent

The 30-year fixed averaged 7.11 percent on November 12, Freddie Mac says. It has come down four weeks running from 7.40 percent in mid-October, but it's well above the 6.24 percent of a year ago. On a $350,000 loan, 7.11 percent works out to roughly $2,350 a month in principal and interest versus $2,150 at last year's rate, or about $200 more every month for the same house.


We wouldn't count on the decline lasting. Rates followed the 10-year Treasury yield down from its early October peak, helped lately by lower oil prices on hopes for a US-Iran deal. But October inflation came in hotter than expected and the 10-year is back above 5 percent. The Fed raised rates in September and held in October, and as of November 16, futures were pricing another hike in December as close to certain. We're planning around rates near 7 percent.


Fuel, Steel, Labor

Diesel averaged $5.94 a gallon nationally the week of November 16, about 54 percent more than a year ago, EIA data shows. It has dropped three weeks straight and sits well below the $6.53 record from late September. Florida's region is at $5.54. Crude has fallen faster than diesel because the wars have cut refined fuel exports from the Gulf and Russia, so freight surcharges and delivered prices will come down more slowly than pump prices.


Steel is firm. The 50 percent tariff continues to limit imports, and US raw steel production is running about 6 percent ahead of last year.


Labor is getting harder too. NAHB says more than a third of builders ran into immigration enforcement activity in their markets in October, which is delaying jobs and keeping some legal workers off site. Every extra week on a job costs more at today's financing rates.


What Moved Last Month

The rest of the framing package followed lumber down. Spruce 2x4 fell 5.5 percent, borate-treated Southern Pine fell 6.1 percent, Southern Pine 2x12 fell 4.3 percent, and pressure-treated 4x4 fell 4.1 percent. Southern Pine 2x6 didn't move.


Spruce 2x6 and studs fell the hardest. Commerce finalized lower duties on Canadian lumber on October 14, cutting the antidumping and countervailing rate for most mills from about 35 percent to about 25 percent, with the separate 10 percent Section 232 tariff still on top. Demand is weak too, and lumber futures slid under $515 per 1,000 board feet in early November, a level we haven't seen since September 2024.


Plywood and steel went up. CDX plywood rose 4.6 percent, rebar rose 5.2 percent, wire mesh rose 5.5 percent, and steel garage doors rose 6.1 percent. OSB was flat after two big jumps this fall, and roofing, drywall, insulation, windows, siding, and doors barely moved.


We don't expect lumber to stay this cheap. Mills have been curtailing and closing capacity for months, so if rates ease and buyers come back, supply could tighten quickly.


January Price Increases

Manufacturers are telling us what's coming. Among the announced increases that land between now and early February, the typical one is about 6 percent, and most fall between 5 and 8 percent. Insulation runs higher, at 5 to 12 percent. Bagged concrete, mortar, grout, and stucco mixes are up 4 to 10 percent, which matters on every block-and-stucco house in Florida. One large siding manufacturer says its yearly fiber cement increase is about 3 percent.


The tariff on imported cabinets and vanities is also set to rise from 25 percent to 50 percent on January 1 unless a trade deal changes that. A package quoted in November can carry a different price by the time it's delivered in January or February.


What We'd Do

If you have projects that are sold or scheduled, especially first-quarter starts, we'd lock in framing lumber and trusses now. Prices are near two-year lows, but we wouldn't stockpile, since storage and carrying costs eat into the savings.


Before any January deliveries, check pricing on insulation, mortar and concrete mixes, siding, and cabinets, and keep escalation language in contracts that run into 2027. We wouldn't count on lower rates to help a spec home sell.


Freight and jobsite mistakes are where you can still save money. Every partial load and extra trip costs more with diesel this high, and a wrong order or a round of rework can wipe out the lumber savings.


The RoMac Building Supply Whole House Commodity Index is based on wholesale costs of the base components to build a 2,200-square-foot wood-frame home with a concrete stem wall in Central Florida. The Index includes foundation, metal, concrete, block, stucco, cement, wood framing, siding, sheathing, trusses, roofing, drywall, insulation, windows, doors, trim, garage doors, and most building hardware. It does not include decor, electrical, plumbing, mechanical, landscaping, or labor. Because the Index uses current wholesale costs, it serves as a leading indicator of the direction of residential building material prices over the next 30 to 45 days.


Jake Trapp is the President of RoMac Building Supply in Central Florida.


CLICK HERE to sign up to receive these reports and RoMac news.

Comments


bottom of page